Updated ROM for Fastlane Z3 (support for 060) [Submitted by Flenn Bjorcken] V8.5
This is the latest firmware for the Fastlane Z3, which allows it to work in
machines which have an 060 processor. Please note however, that you cannot
simply flash update the firmware. It requires burning to an EPROM.
The 8.5 firmware is also needed for the 256Mb upgrade however this wont enable the 256Mb support. Some PALS/GALS need to be replaced to make this work.
The jedcs for this are not archived yet or any where on the internet.
This is only being upload for archival reasons.
ROM for Fastlane Z3 [Submitted by Discord Yeet#6894] V5.998
This is Firmware v5.998 which was copied from my Fastlane Z3 rev2.2
EDIT: There maybe issues with this and the 040 as the owner before said it wont work in his 4000 with an 040 this probably due to the clock driver chip not being changed to the correct chip.
For fitting inside the A4000/040 with version 3.0 68040 processor boards, a 74FCT240 clock driver chip is also provided. This replaces the original 74FCT244 chip at position U103 on the motherboard, directly under the processor daughter-board.